Description
Approx. 7/8″ Long Set of 2 – Just in case you lose one, you will have a spare.
Place this little magnet across the groove on the front of your needle to determine the direction that the (eye) is pointing. It should be pointing straight at you!
If you take a needle and look at it closely, you’ll see a long groove down one side. That’s the front of the needle. On the opposite side to the groove, you’ll see a scooped out part right above the eye. That’s called the scarf. The scarf is in the back.
Stand directly in front of your machine. Place the needle into your machine so that the scarf is in the back and the groove is in the front (facing you). The eye should be lined up so that you can see directly through it. Make sure you have pushed the needle all the way up. There is a sight hole where the needle goes in and you can see when the needle is all the way to the top. Place the little magnet across the groove in the front of the needle & adjust the needle until it is pointing straight at you. Tighten the thumb screw securely.
Magnet 0.187″D x 0.875″ Thick Cyl
